[LB-1950] Operational Microscope for Ophthalmology (Cataracts & Other Eye Surgeries)

Features

• All the lenses are multi-coated, mildewproof and anti-reflective.
• Optional objectives: f250/f300/f350f/f400.
• Desktop stand can be chosen to make the device more portable. It can also be customized according to various operation requirements.
• Foot control focus, 3 gears magnification, sharp images and comfortable observation, can meet the needs of cataracts and other eye surgeries.
• With apochromatic technology, focal points of different wavelengths light through the lens are very close, the operators’ vision is more clearly.

Technical Specifications

Name and use of components

[1] Caster
Move and support the equipment[2] Foot control switch
Be used to control the focusing functions of microscope[3] Floor stand
Be used to support & fix stand pillar[4] Stand pillar[5] Fuse
Two (1.25A/2.5A) are used to power supply[6] Light-adjusting knob
Used for continuous adjustment of illumination intensity.[7] Power supply switch
Be used to switch on or switch off power supply.[8] Spare bulb module
In case the working bulb burnt during an operation, the spare lamp module may be inserted so as to ensure the operation to be continued smoothly.[9] Bulb module[10] 7-pin plug/socket
Connecting wires for focusing control[11] Fixing nut
This nut lets microscope suspend on the small horizontal arm. Though there is protective melt, you must check this nut tightened or not.[12] Star fixation knob (with sterilized cap)
Fix the revolving angle of the suspended spindle of microscope.[13] Star fixation knob (with sterilized cap)
Lock the microscope and make it not revolve at up and down plane.[14] Diopter adjusting ring
Adjust ocular diopter by rotating this ring. The range of adjustment is ±6D.[15] Eyecups
Adjust exit-pupil distance. Its height is 18mm and it may be taken off or rolled down.[16] Manipulating handle (with sterilized cap)
For rough focusing, move the microscope up and down or right and left.[17] Magnification knob (with sterilized cap)
Three magnification steps are provided. With different objectives the magnification factor of each step differs. Rotating the knob to change the magnification.[18] Fixing block circle
Fix the manipulating handle so that it will not loose.[19] Fuse pin
Avoid the microscope dropping when the fixing nut looses while unloading it or suspending it.[20] Fiber optic
Lead the light beam from bulbs to the operating position.[21] Star fixation knob(with sterilized cap)
Lock the little arm by tightening it firmly so as to prevent the microscope from moving up and down.[22] Star fixation knob
Tighten it in order to lock the little arm and make the microscope not move vertically.[23] 5-pin plug/socket
Connect the foot switch.[24] Star fixation knob
Tighten it in order to lock the light source box to make it not revolve when moving or storing.[25] Inner hexagonal tightening bolt
Lock the stand pillar and the light source box[26] 110/220V selecting switch.[27] Power plug
Input power supply

Optional Accessories

1. 10× Eyepiece.
2. Table installation parts(holding stand, split column).
3. Video devices(1/2” or 1/4” CCD Camera, CCD Adapter, Beam Splitter and Connecting Cable).
4. Straight Binocular, Universal Joint(for ENT).
5. Portable packaging. Including three canvas bags and a luggage cart.
6. CCD Camera  – LC-8 C-Mount HDMI+WiFi CMOS Camera
7. Magnifications and filed for optional objective lens: